Your cart is empty.
Your cart is empty.IdeaFormer-3D PEO PEI Magnetic Build Plate For Creality K1/K1 SE/K1C 235x235mm, Diamond PEO Textured PEI Spring Steel Bed Plate for Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 V3 SE/KE/Ender 3 V2/Neo
Dave C.
Reviewed in Canada on February 4, 2025
Very satisfied with this product! I "accidentally" crashed my nozzle into my previous build plate and had to replace it—this one is far superior to the original. It offers better grip, improved heat retention, and even looks better. I'm extremely happy with my purchase!
Mwright
Reviewed in the United States on February 19, 2025
This product performed well initially, but after a few uses, I noticed the prints weren’t sticking as securely to the plate. To address this, I’ve been applying a bit of glue to the plate, which helps keep the prints in place. I’m still using it and find it satisfactory overall, though be prepared to use some additional glue for better adhesion.
Emile
Reviewed in Canada on January 7, 2025
The media could not be loaded.
Doug H
Reviewed in Canada on January 20, 2025
Very weak magnetic base layer. My prints can pull the corners of my build plate up. Total waste of money. I feel I was ripped off
Jos
Reviewed in Mexico on August 27, 2024
The media could not be loaded.
lunchbox
Reviewed in the United States on August 17, 2024
i use these to transfer the cool holographic design to the prints and ill say printing abs on these is amazing no glue nothing just a clean sheet and a 6mm brim no lifts nothing after the print cools they just slide right off!!!!p.s. if you print and touch the design on the print and it wears off just hit with some 91% ipa on a clean rag and itll all come back!!
Jordan
Reviewed in the United States on July 21, 2024
I have never had any problems printing with this base. Adhesion is great. Install is super quick and easy. I love the design that it puts on all of the pro te as well. Great quality product
Matt E
Reviewed in the United States on June 17, 2024
UPDATE: Seller reached out very quickly, and shipped me out a new sheet immediately. So far so good. The new sheet feels different versus the first one I received and prints are coming out FLAWLESS. Updated review from 2 Stars to 5 Stars. Thank you!At first, adhesion was fantastic. 5 prints later, nothing was adhering. I figured, it’s got to be my bed level. Retrammed the bed, everything was fine, then I thought about cleaning the plate, used a small drop of dawn and a microfiber cloth, cleaned it, washed it, let dry, used 99% IPA to clean off any mineral deposits or water/soap residue. About 10 failed prints later, I decided to check bed level, Z-offset, everything. Eventually, I got adhesion but only after my nozzle dug into the PEO side. So now I only have the textured side. It's adhering (for now)...
OrangeBlossom
Reviewed in the United States on June 12, 2024
This was my first time using a build plate with transferable designs on it and I like it!It was easy to install and I only had to do a couple minor adjustments and a bed level and it was ready to go. I like that it adds a nice finishing touch to some of my pieces. With the way it transfers, obviously designs with large flat bottoms are going to work and show up the best. I did do a rotating rings toy and while it shows up it's not as obvious to me.Adhesion was good, I didn't have any problems with my designs lifting at all. The pieces all came off the plate easily with little flex needed.The one issue I have with this is that in a couple of spots I noticed some dead areas where the design is missing on the plate. There's no difference in the height of the area, it's still smooth, but for some reason the rainbow isn't in those couple of areas. For me it's not a big deal since it's off to the side of the plate but it's definitely something to keep in mind.Overall a nice new tool to work with. Easy to use, neat effect, and I would get this again.
christopher french
Reviewed in the United States on November 29, 2024
Love the pattern, and for most prints glue has not been needed
Avery
Reviewed in Canada on January 25, 2024
I think this is a nice 3D printing bed to use. I got the sheet with a PEO side as well as the PEI side, and I would say they’re made well. I found that the sides work well, and the PEO side in particular transfers prints pretty well. I have an Ender 3 pro (from way back, before any of the printers listed were made), and this works seamlessly with the original magnetic plate. It does include a magnet though, just in case you don't have one.If you’re not aware of PEO, basically it works the same as PEI, but it transfers the look of the bed, onto the bottom of your print. Meaning you can get the look of things like carbon fiber, or in this case, triangles on the bottom of your print. The only issue is that PEO is basically useless for anything other than PLA. I found that all I needed to do was wait until the bed cooled down, and all I needed to do then was flex the build plate a little and it came right off.I also found that the PEI side also worked pretty well. I would still clean the bed every time before you print, but it works as well as other build plates I’ve had. I found that even on the roughest of PEI sheets, sometimes you will get material that wants to lift off (because of dirt or oils), so it’s just better to clean it every time if you can.If you’re looking at this and aren’t sure whether or not it’s worth it, I would highly suggest you look at how often you’re printing with things other than PLA. If the majority of times you’re printing with PLA, and you want something that looks nice on the bottom, I would say this is a good bed. But if you print with other materials like PETG, ABS, TPU, TPE, HIPS, most of the time, I would probably get a bed with two PEI sides. It’ll just be better to have a backup. Accidents happen, and when they do, you’ll have a spare side.For $35 I think it’s a good build plate. I would say that the only major issues that it has, basically all spring steel build plates suffer from (like if your bed isn’t completely flat, this won’t fix that), but having two different sides to choose from is nice for me.
Mike Monroe
Reviewed in the United States on April 29, 2024
the prints stuck very well to the bed and once cooled the prints came off easily. Wipe the plate down with alcohol before every use and only use it with PLA,
XenoFreak
Reviewed in the United States on April 21, 2024
The media could not be loaded.
Recommended Products
