Your cart is empty.
Your cart is empty. Fits the following models - Current MR. HEATER - MH50KT; MH75KT; MH125KT; MH175KT
Current HEATSTAR - HS50KT; HS75KT; HS125KT; HS175KT
Current ALL PRO - SPC-; SPC-K50; SPC-K100; SPC-K125
Current SPC-K150; SPC-K175
Current UNIVERSAL - K50-FA; K75; K100-FAT; K125; K150-FAT; K175
Customer
Reviewed in the United States on February 11, 2025
Does not fit Mr. Heater MH125KT. Flats on shaft are too narrow to for motor. Returned item
Adrian sejevick
Reviewed in Canada on January 7, 2025
Works on the Mr heater 210,000 btu heater but… the center locking piece does not have a big enough hole so had to use the old one(thank god it was still in good shape). The impeller is thicker than factory so had to sand it down a bit so I could tighten the pump screws. Otherwise without sanding it down the screws hold the impeller too tight and the fan won’t turn
Alden S
Reviewed in Canada on March 4, 2024
Everything was fine, except for centre plug too small for shaft. Had to use sloppy old one. Works like new now.
Ray
Reviewed in Canada on March 20, 2024
Product is good but in like all the reviews they all complain that the plastic piece doesn’t fit the motor shaft and there right all though what I did was drill a hole in the motor shaft insert a pin from a nail or a spring pin that well fit in the slot of the fuel pump. Works very good. Ps be careful don’t drop the part or hammer on it if a tight fit. It’s made of graffit material and we’ll break very easily.
R CHANDLER
Reviewed in the United States on March 19, 2024
Was easy to install. Saved me a lot of money and got my heater up and going again
J.L.
Reviewed in the United States on March 16, 2024
didn't realize how much better these heaters work with new parts
Timothy lynn
Reviewed in the United States on February 29, 2024
Worked great 👍
Stephanie2222
Reviewed in Canada on January 23, 2024
This does not fit a mr heater mh125ktr. Hole in the rotor is too small. Broke it trying to install and now im out 70 bucks and still have a heater that doesnt work.
Edward Dureault
Reviewed in Canada on January 20, 2024
Right price
Brittney
Reviewed in the United States on December 2, 2023
I bought this for one of my heaters that had a rotor break. The plastic hub that drives the rotor that came in this kit wouldn't fit the shaft of either of my heaters. I used the rotor in another heater that had the plastic hub in good place but it was down on pressure and it worked great but the plastic hubs won't work in my older Mr. Heater 175,000 BTU heaters.
Ken
Reviewed in the United States on August 22, 2022
Shaft insert does not fit model Mh175ktr as was stated. I had seen other reviews that said the same, but bought it anyway hoping they had resolved that problem. I did install the rotor and veins using my old shaft insert and cured the problem but someone needs to resolve this issue.
Ethan
Reviewed in the United States on December 28, 2022
I put this in a master 140,000 btu from tractor supply it was to thick shaft size was correct so I machined it down some got it to fit but it still wouldn’t make enough pressure to run the heater!
Chuckie
Reviewed in the United States on November 9, 2022
I specifically needed this item for a forced air heater. Upon receiving my part, it did fit over the shaft but the plastic hold pin that holds the impeller in place does not fit. It has been a while since I had purchased this but did a quick fit to make sure it would work over the shaft and it did but I did not put in the plastic grommet to hold the impeller in place and found out it does not fit. The impeller itself being graphite fit perfect but the plastic insert to hold this impeller in place did not fit. If you were to buy such an item for your forced air heater make sure that the plastic insert will match up properly for that the one I received does not work whatsoever. I wish that I had caught this earlier before keeping this product I specifically asked if this would fit my forced air heater and was told it would,and now I can't do anything with it for that it has been over 30 days. Item wasn't cheap either.
Recommended Products
$39.50
$ 19 .99 $19.99