Your cart is empty.
Your cart is empty.Product Description
-
11.0 lb / 2.2 lb / 1.1 lb
SuperElastic 60A
[60A Shore Hardness] 60A Shore durometer and 46% elongation at break well-suited for 3D printing human skins, faces, buttons, hairs
[Balanced Softness with Resilience] Balanced softness with resilience to simulate two component silicone prototypes
[Fast Printing] Printing 50um layer in 1.3 sec with monochrome LCD 3D printers, saving on time and electricity bill
[ISO 10993-5] Properly cleaned and fully post cured SuperElastic prints pass ISO 10993-5 test
-
11.0 lb / 2.2 lb / 1.1 lb
SuperFlex 80A
[Balanced Softness and Strength] Balanced softness with strength to simulate rubber or TPU for hard flexible (80A Shore) prototypes
[80A Shore Hardness] 80A Shore durometer and 100% elongation at break well-suited for cushioning, damping and shock absorption
[Fast Printing] Printing 50um layer in 1.7 sec with monochrome LCD 3D printers, saving on time and electricity bill
[ISO 10993-5] Properly cleaned and fully post cured SuperFlex prints pass ISO 10993-5 test
-
11.0 lb / 2.2 lb
SuperFlex UL94 V-0
[Non-Flammability] Pass UL94 V-0 non-flammability requirements and FST (AITM2-0002, AITM2-0007, AITM3-0005)
[Balanced Softness and Strength] Balanced softness with strength to simulate rubber or TPU for hard flexible prototypes
[80A Shore Hardness] Well-suited for cushioning, damping and shock absorption with non-flammability
[Compatible to All LCD Printers] Compatible for all kinds of LCD 3D printers
RECOMMENDED LAYER EXPOSURE SETTINGS FOR 3D PRINTERS
These settings were measured and tested for a 50μm layer thickness. Adjust the exposure time by ±15% based on your printer's conditions. Colored prints were tested using the recommended number of pigment drops per 100mL of clear resin.
Thomas G.
Reviewed in Germany on March 3, 2025
Das Harz ist natürlich "weicher" als ein Standardharz. Aber bei der geringsten Dehnung platzt es auf wie ein Sofakissen...es kommt also nicht einmal in die Nähe von "Silikonähnlich"!Zum Glück nur 500g von diesem überteuerten Schrott bestellt.
Ryan S
Reviewed in the United States on May 3, 2024
Marketed as an elastic resin. It -is- bendable and soft. But the problem, for example, you print a hallow squeeze ball with supports inside, and a vent hole. 10-20 squeezes and the walls -- regardless of wall thickness -- 1mm to 5 mm... tested them all, they will crack and break, and internal supports break. If you pull on it to test its elasticity, it just tears. I've also tried variations in post processing. Little time in IPA, lots of time, no UV post cure (leaves sticky), and UV post cure... all net similar results. Also find it interesting its not listed on 3D Materials website anymore, so this must have been a problematic product they're trying to sell their balance of inventory. Just my opinion and experience. Would welcome any feedback from 3DMaterials if there's something I'm doing wrong and can try! Ultimately would love to have this as an option. Plus sides, bonded awesome to print bed, print quality was great, and easy to use resin! Just won't hold up for its intended and inferred purpose! LOL
Frog
Reviewed in the United States on March 18, 2024
I mixed it with a standard resin to give it a stiffer feel.
Customer
Reviewed in the United States on February 8, 2024
I purchased this to print some custom gaskets. I had some issues initially and print failure. I reached out to the 3D Materials customer support, who went above and beyond what I expected. They tested my stl file on the same machine I am using. Then they sent me the settings to use and even a video! When I used the settings they provided the print worked well. I will definitely buy more of their resin in the future!
Jake the Dog
Reviewed in the United States on February 10, 2024
Product is awesome other than it doesn't really stretch more than 20 percent.
Ralf Kaszemek
Reviewed in Germany on December 18, 2024
Standard Resin ist oft recht spröde und bricht schnell.Bei einer Beimengung von 10% -15% erhält das Modell eine gewisse Flexibilität und kleine Details biegen sich statt zu brechen.
Customer
Reviewed in the United States on November 20, 2024
This stuff is super cool to work with. Make sure to follow directions, i didnt the first time and the product was too cold and not mixed well enough. Once i got out of my own way its amazing to work with.
Review12
Reviewed in the United States on August 3, 2023
The is a flexible resin if that’s all your looking for go for it.It prints nice, I suggest printing at very low layer hight the squish causes ever more print errors the higher your layer height. I printed this at .02mm at 3 seconds. Tall objects are difficult. It has very low Oder which makes me want to try out more of this companies resin to see if that’s a trend.The gripe I have is it’s advertised as shore 40A when it’s closer to 40C I would love to know how they could even think it was “A” soft. It also has a very low elongation to break probably less then 30% which also isn’t very silicon like. This is just typical flexible resin as far as mechanicals go.
Some Guy
Reviewed in the United States on May 12, 2023
This is for sure not a beginners resin but it fills a niche. I'm printing thin gaskets that get clamped between plastic parts to create a water tight seal. This has enough squish that it does a very good job of it. Print settings that ended up working on my Halot Lite are 1 base layer at 5 seconds and 2.5 seconds per .1mm layer. At 2 seconds I saw layer separation between the first and subsequent layers. At 3 seconds I saw some curling in the final print. Since I'm printing flat to the plate, these do need to be scraped off. A sharp scraper with firm pressure gets clean release but have no illusions that this will pop off the plate. Even with thorough washing and post curing, the top layer remains tacky. Getting it to be non-tacky requires that prints be rinsed with virgin IPA and then left in the sun for hours. For reasons that are beyond me, my curing chamber wouldn't get it done.
Jerry
Reviewed in the United States on November 12, 2023
This may be the most flexable resin I have used so far. Very soft, but not very strong. Also, it stays soft for months after printing, as where some other flexable resins I have will harden up over time. Also, very fine features will sometimes not print right due to the super flexy nature of this resin.Good resin for the right job, but not a do it all resin.
Recommended Products