Your cart is empty.
Your cart is empty.Product Description
Tips and Tricks
Before beginning work with the System Three Epoxy, make sure that surface imperfections are addressed.
Contains no VOC
Our General Purpose Epoxy is made with your health and safety as a top priority.
Premium Epoxy
SilverTip Epoxy is a great choice to create a waterproof barrier coat on wood components in addition to wetting out a wide range.
Versatile Application
Start from scratch... or start with scratches. SilverTip epoxy is made to address any marine scenario under the sun.
What is the SilverTip Series?
Our SilverTip Series was created in an effort to make epoxies even more accessible. We have "eliminated the guesswork" by formulating application-specific epoxy products to address every common marine project. With the most user-friendly epoxy products on the market, the SilverTip Series, we're making boatbuilding easier and more fun.
Deborah Barrett
Reviewed in the United States on January 26, 2024
Water clear and no volatiles make it almost odor free. Refinishing 3-0 x 8-0 exterior doors laid flat on sawhorses. Did not flow out as well as other epoxies, left roller stipple and brush marks. Applied at 71F with 1/8 nap foam roller as directed. Do not use bristle brushes as instructed, use foam unless you like picking/sanding bristles from your work! Mixed 15oz batches, 30 min working time easily adequate. Sands well, coverage about as indicated on label, however this left heavier coat than I desired when cured. Lower viscosity with better flow out would be preferable for woodwork.
Franz Jelen
Reviewed in Canada on August 14, 2023
No need to wash with soup and water to get rid of the Amino Blush. That saves a lot of time and agony. The Silver tip Epoxy is blush free.
JA
Reviewed in the United States on March 24, 2022
This is my new favorite epoxy. Works great for fiberglassing over foam and, best of all, no odors!
David L Nicholson
Reviewed in the United States on November 20, 2021
Very good epoxy bonds great and is easy to work with!
Hermann Pais
Reviewed in the United States on April 6, 2021
This stuff is the best! I kept the resin and hardener indoors at home temperature (65-68F) and used it in my chilly Seattle garage which typically stays at 45 degrees all fall and winter. The coating goes on very nicely. No amine blush hence you don’t need to sand prior to applying a second coat.Thinning with acetone at 10% yields a very fluid mix which is perfect for coating the plywood, prior to glassing.Another usage note: I thinned and applied over the glass layer it cures to a very glossy finish, a perfect hot coat appearance.As you can see in the pictures I used it to make an Okume plywood Stand up paddle. The edges are your home pink foam. They’ll be painted black after the final hot coat.What is special about this epoxy resin that makes it suited to our temperate weather? It’s formulated right around the corner in Auburn, WA.
Christopher M.
Reviewed in the United States on September 15, 2018
I sincerely enjoyed applying this epoxy. It's very thick so it creates a nice thick layer when dry. I did, however, have to add some alcohol for one of the applications to thin it out so it spread easily. I ended up using my hand to spread it evenly which is the only tool I found to be effective enough at spreading the epoxy evenly.I put two coats on each side. 3 out of the 4 coats had an abundance of air bubbles which eventually popped during the curing process leaving my project looking like a 13 year old, acne ridden face. I found this to be the result of my mixing technique, so, mix slowly as not to introduce any air into the mixture.I used the slow hardener which did not cure in 40 minutes, it was closer to two hours so just be aware of that. Other than those observations I really loved the final product I created with System Three Silvertip Epoxy.
JHT
Reviewed in the United States on July 6, 2018
This is really great epoxy - no blush, easy to work with and strong clear finish!
tnj
Reviewed in the United States on March 28, 2017
I'm using this to fiberglass and encapsulate a small boat I'm building. Using the metering pumps, I've never had a bad batch. It wets out the glass beautifully and cures hard over night. The claims of "no blush" are accurate and I have not had to sand between coats when they are applied within a day or two. I chose this since I'm doing a "bright" clear finish over Mahogany, and this stuff cures clear.
J.H.
Reviewed in the United States on January 16, 2017
Great Product. Have used West Brand and Marine Poxy Brand. I would rate West Brand as a 2 star in Comparison and Marine Poxy 4 1/2 to 5 stars in comparison.
Recommended Products