Your cart is empty.
Your cart is empty.Product Description
Circumstances and Jack Pads.
Car Weld Pinch
Recommend:
Universal aluminum weld pinch jack pad (Slot Width 0.39" or 0.55") to protect the pinch and paint.
ASIN: B078J55SBW
ASIN: B07Z635VYT
Plastic Jack Point
Recommend:
Aluminum jack pad with rectangle support to protect the plastic pieces.
ASIN: B074FPZFJH
ASIN: B07SCY1NBJ
Oval Holes on Chevrolet Cars
Recommend:
Aluminum jack pad for Chevrolet C5 C6 C7 GS Z with oval hanger to protect the car chassis.
ASIN: B07S8MYQC7
Round Holes on Tesla Model X & S
Recommend:
Aluminum jack pad for Tesla Model X & S with round support to protect the batteries and paint.
ASIN: B07S9Q879G
Robert W.
Reviewed in the United States on March 16, 2025
This fits well on the pinch weld jack points of my car. It has strong magnets to keep it place while the jack is positioned beneath it. Just remember to pull it off after the work is done!
Customer
Reviewed in the United States on March 14, 2025
Great product and very well made.
Handyman
Reviewed in the United States on January 9, 2025
Product appears well made but puck appears smaller than anticipated. No points for fast shipping.
Brian Blum
Reviewed in the United States on June 9, 2024
I used these to jack up my daughter's 2015 Toyota Camry for me to do her brakes. They're great...the orange color is useful to help remember to remove them (yes, I'm human lol) and the vinyl-ish material that the pinch weld rests in is great to help protect it from damage. The magnets aren't incredible, but they hold sufficiently for the job. It is incredibly helpful to be able to place these on the vehicle before lifting your floor jack, and have an easy target to point the saddle towards. As always, NEVER get under a vehicle with just a floor jack...use jack stands with a pin lock mechanism, and only use the jack for initial lifting and additional backup support after securely setting the vehicle on the jack stands. Safety safety safety. Cheers!
Espresso
Reviewed in Canada on May 26, 2024
Works great, easy to use - does what it is supposed to do. Makes lifting the vehicle a lot easier and adds stability.
J. Coleman
Reviewed in the United Kingdom on May 17, 2024
A high quality jack pad, but it only works if your jack points are in good condition. If the sill seams at the jacking points have already been damaged (or they are in good condition but plastic covered), this pad won’t fit. If your jacking points have already been damaged, find someone with an air hammer to get them back into shape.
Ryan
Reviewed in the United States on November 25, 2024
This works perfectly for my 2020 jeep Grand Cherokee, fits the pinch welds perfectly and allows me to use my floor jack without issue.The magnets might work too well though. On multiple occasions I've lowered the jack and forgotten the jack pad is still attached to the car. On the plus side, they hold on well enough that Ive found the pad still attached being the front wheel after a 700 mile road trip in the middle of winter driving through slushy snow half the time.
Snuggie_Deluxe
Reviewed in the United States on November 18, 2024
I had a hard time tracking this information down, so I'm writing this review with my experience and knowledge. I have an Audi Wagon (B8). If you're going to get this, you need the 0.39" wide one, NOT the 0.55". Assuming your pinch welds are not damaged, these fit quite nicely. There are a few places on my Audi where the rubber covering on the pinch weld seems slightly larger (I'm assuming damage) and the 0.39" puck is too small to fit over that portion, but the damaged area is small and I can place the puck just above or below it without issue. If you go with the 0.55" wide puck, you'll find it's way too big and I didn't feel comfortable with that version. The 0.39" puck fits perfectly on the pinch welds in front and back. Bought 4 in total.
TARIQ A.
Reviewed in Saudi Arabia on June 11, 2022
لا انصح فيه . خطر انزلاق السيارة
Almost Satisfied
Reviewed in the United States on November 6, 2022
I recently got this in preparation to rotate the tires on my truck and it worked perfectly.Previously, I had been using my emergency jack to lift the front tires of the truck as my floor jack did not interface well with the front end.I used the floor jack as usual for the rear tires on the axle as indicated in the manual for my truck. This came into play whilst lifting the front tires. I put this on the front pinch weld and applied the floor jack to this and it worked perfectly. The magnets are plenty strong enough to hold this device on to the pinch weld while getting the floor jack into place and raised.Once the front tire was in the air, I changed it as normal. The truck felt secure and I was able to get the tire wrestled into place without issue. Once the tire was on and the lug nuts zipped on with the rattle-wrench, I lowered the truck and the adapter stayed in place on the pinch weld.This device works very well for its intended purpose and I am glad that I got it. Looking forward to many more years of working on my truck and being able to use a proper floor jack. Highly recommended!!
Gromit
Reviewed in Canada on September 30, 2021
Initially, I used this with a 1.5 ton jack which had quite a small saddle (the part that's in contact with the vehicle). When I jacked the vehicle up, due to the movement of the jack, the adapter shifted on the saddle and it looked as though it was going to skid off and damage the sill, so I lowered the jack immediately.I since changed the jack for a 3 ton one which has a 3 inch saddle. The adapter sits comfortably inside that, and is now flat, metal to metal, so is very secure.The adapter is very sturdy and looks professionally made, has no rough edges and looks to be made of quality materials. The magnets are sufficient to hold it firmly to the metal weld without it being difficult to remove.As others have found, it's very easy to forget to remove the adapter (I have the black one), as it's almost invisible when under the car.I would highly recommend the adapter, but please take note of my warning about using this with a smaller saddle, as it could cause an accident or damage to your vehicle if it slips off.
Sam C.
Reviewed in the United States on May 14, 2020
I had been meaning to buy one of these adapters for awhile. I had thought about buying a rubber one or buying a hockey puck and modifying it to fit my pinch welds. I am glad I found this aluminum one instead. I’m not going to ever have to worry about it splitting like a rubber one can eventually do. This is a very high quality product! I like The 3 inch diameter and low profile size that allows it to fit on more vehicles. I also like the nylon insert that protects the paint, and I like the strong recessed magnets that hold it to the pinch weld (I am pretty sure they are neodymium magnets). They make it really easy to line up the jack underneath it. One thing to note about the magnets though is you need to remember to remove the tool from the pinch weld when you’re finished using the jack. I was rotating my tires at night, and I almost forgot to remove it after I mounted the last wheel. Of course that’s not an issue with the tool, you just need to remember to remove it or else you could lose it when you’re driving on the road. Then again, those magnets are pretty darn strong which is a good thing. I bought this to use on my 2017 Pacifica, because the underside is covered with panels everywhere, so you’re pretty much limited to raising the vehicle at the pinch welds if you’re using a floor jack, and it works great for this! If I somehow lost this I would definitely buy it again and I definitely recommend this to others who need this type of tool for their vehicle. Great job POTAUTO! Now I’m interested to see what other products you have.
Reginald Hildebrand
Reviewed in Canada on November 30, 2020
Works great on our Toyota RAV4 but does not fit my Honda Ridgeline.
Recommended Products