Shopping Cart

Your cart is empty.

Your cart is empty.

VEVOR Sand Anchor, 36' Length Auger to The Beach and Sandbar, 316 Stainless Steel Screw Anchor w/Removable Handle, Bungee Line & Carry Bag, for Jet Ski PWC Pontoon Kayak

Free shipping on orders over $29.99

$32.99

$ 17 .99 $17.99

In Stock

About this item

  • Never Drift Away: Our sand anchor is 36" in length. It can go into shallow water, deep water, a beach, or a sandbar to keep your boats and jet skis securely tethered. Gives you peace of mind and security so you can enjoy hot summer days.
  • Handle & Auger Design: 10.1" T-shaped handle with a soft foam grip is a great helper for turning the anchor down into the sand. The handle can also be removed when the assembly is completed. The screwed auger design ensures that the boat sand anchor has strong holding power.
  • High-Quality Stainless Steel: The sandbar anchor is made of high-quality 316 stainless steel, which keeps it rust-proof in seawater and freshwater. Apart from its polished attractive appearance, it also has a 4400 lb load capacity.
  • Easy Operation: You can set up this PWC anchor in seconds. Simply screw the anchor into the sand with the T-shaped handle. Then remove the handle and tie the bungee dock line included in the package.
  • Carry Bag Included: The portable carry bag included can avoid unintentional scratches during transportation. This sand boat anchor is fit for boats less than 25 feet long. The anchor can be used on beaches, sandbars, and shallow water beaches.


36" Sand Anchor
Rust-proof & Screwed Auger Design & Set-up in seconds
If you are searching for a sand anchor, then look no further than VEVOR. Our sand boat anchor can fit most 25 feet boats. The strong drill provides tremendous holding power to secure your boats. The 316 stainless steel material can enhance seawater corrosion resistance performance and never stain. The removable handle with foam grip makes installation comfortable and easy, which only takes seconds. Let’s enjoy your hot summer days without worrying about boats.
key Features
Perfect Compatibility
Our sand anchor for boats is also perfectly fit for kayaks, assault boats, and fishing boats. The largest size is 25 feet. Please check the size of your boat before purchasing.
Strong Drill
The sharp screw auger in our pole anchor for boats can be easily screwed into the sand. The high grip force ensures that your boat is berthed in place.
Removable Handle
The handle can be assembled through the welded ring. With this design, using a pontoon boat anchor will be labor-saving and effortless.
Durable 316 Stainless Steel
The 316 stainless steel is rust-proof and corrosion-proof. You can anchor in shallow water, seawater, or freshwater without worries.
Simple Operation
The operation is simple and effortless. The installation is done by spinning the PWC sand anchor into the sand and then tying the bungee dock line.
Additional Accessories
There is a portable carry bag included in our package. It can protect you from injuries during transportation. It can be used in many sites such as beaches and sandbars.
Specifications
Model: VV-SA-36
Material: 316 Stainless Steel
Load Capacity: 4400 lbs
Handle: Removable
Grip: Foam
Boat Sizes: Max. 20 feet
Size: 35.4" x 10.1" x 0.63" / 900 x 256 x 16 mm
Package Content
1 x Sand Anchor
1 x Bungee Dock Line
1 x Carry Bag


Giulia B.
Reviewed in Italy on January 27, 2025
Unico appunto é che si va male ad avvitarlo nel fondale con il “manubrio” in dotazione perché troppo fino rispetto all’anello di acciaio
Dayton Busby
Reviewed in the United States on September 29, 2024
Works easily! Must have
Jon-Marc LEplattenier
Reviewed in the United States on August 26, 2024
20’ deck boat. We use for the bow anchor when beaching it. It takes a bunch of turns to get into the more dense sand but once you do it drives itself deep and easily hold our boat in place despite wakes from other boats, waves and general conditions. I think the key is the bungee which doesn’t jerk it out of place.
Jeff Dumoulin
Reviewed in Canada on July 16, 2024
Quality looks good. Will test in the next couple of weeks and post another review.
Earl McGuire
Reviewed in Canada on July 12, 2024
Easily holds our Waverunner in choppy water
Costin
Reviewed in Canada on May 20, 2024
I just used it to hold a 20ft boat at a sand bank. Works real well. Make sure you twist it in the sand deep enough till it feels solid.
tactical sam
Reviewed in the United States on November 1, 2024
At $20 shipped this was the price I wanted.Have used in saltwater and don’t really rinse it.Just toss it in my jet ski.Holds a Yamaha fxho in busy bays with strong currents and waves.Bag is more for looks or maybe boat storage but kinda thin and rips/cuts easily.The foam grips will rotate when wet. Glue them.Maybe drill a hole in the T handle and string it because if u droop it, it’s swim time.The circle/blade pitch is small and takes lots or turns but it goes deep and definitely holds.Won’t bend easily.At $20Is was a great buy. Considered the plastic ones but spoke to the owners. They break and sections clog with sand.This is a simple design that works. Just doesn’t fold away.
jiggs
Reviewed in the United States on October 29, 2024
Had the standard anchor in the front and screwed this into soft sand at the sandbar. Boat didn't budge, even in a decent wind
Earleberger
Reviewed in the United States on October 22, 2024
I bought two of these for our jet skis. They work very well and much cheaper than the competitors.
Ryan L.
Reviewed in the United States on October 2, 2024
I bought this for my 19' bow rider to keep the rear from swinging while anchored at the sandbar as well as a land anchor when beaching. So far no complaints about either and it comes with a nice bag and rubber cover for the tip so it doesn't scratch anything while in storage.
April Guelli
Reviewed in the United States on October 12, 2024
Seemed pretty cheap. Ended up returning
ScottyDoo
Reviewed in Canada on August 18, 2023
I used two (for peace of mind) to hold my 25’ pontoon just off the shoreline. There was a wicked storm overnight with very strong winds and the anchors held it in place. I did screw them all the way into the sand up to the top eyelet.
Dave
Reviewed in the United States on July 17, 2023
Definitely a well made stake. Only concerns I have are the loose fitting T-bar used to screw the anchor into the sand how well the single screw will hold. All-in-all, happy with the purchase.