Your cart is empty.
Your cart is empty. Automatic float valve water level control valve
Working pressure range: 1-10KG (0.1-1MPa)
Applicable medium: clean water
Applicable medium temperature: ≤70 °
High temperature medium temperature: 10 ° ~ 70 °
Type: Vertical internal installation
Material: nylon + rubber
Outlet diameter: 1/2 3/4 inch BSP thread
Size: For detailed pictures, please see the picture on the left
Color: as shown
Working principle: When the surface of the water tower or the pool drops, the float in the valve chamber sinks. Use the hole rod to open the pilot hole of the control valve. Ascend, press the joystick to close the pilot hole, the valve cavity begins to fill with water, and then close the control valve. The sealing surface of the control valve immediately stops the water supply.
Package Contents:
1 water level control valve
1 x parts as shown
Only the above packaging content, other products are not included.
note:
This product is a liquid level control valve.
After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard.
The main water inlet should be aligned with the normal diameter of the control valve.
When in use, the shut-off valve should be fully opened.
If two valves are installed in the same tank, they should be kept in the same level.
Before installation, please clean the impurities in the pipeline to prevent blockage.
If the water quality is not good, the valve needs to be properly maintained.
If the user finds that the time for adding water becomes longer, he can upload the water inlet and rinse
Robert B.
Reviewed in the United States on March 7, 2025
Instead two of them and now my Horse troughs stay full of good clean water.
Ray
Reviewed in the United States on July 16, 2024
Performance fit
Curt Luthy
Reviewed in the United States on July 10, 2022
This was just what I was looking for to keep my outdoor fountain basin filled. Really fast shipping, and easy to install.
Neal Strobl
Reviewed in the United States on June 29, 2022
I was using this to top off the sump tank in an aquaponics system. I came outside today to find my greenhouse flooded and my reservoir emptied down to my emergency shutoff line.Do not use this product.
Archie
Reviewed in the United States on May 26, 2022
Purchased two identical valves. One works perfectly, the other leaks. Not good!
Greg
Reviewed in the United States on May 18, 2022
I installed this in my Keurig water reservoir and it works flawlessly. I leave the water on and it is always full without overflow. It immediately replenishes the water with short bursts from the supply line as the coffee brews.
Olivier Audibert
Reviewed in Canada on March 31, 2022
Gasket and nut to go through the bulkhead are missing.
mark
Reviewed in the United States on June 28, 2021
To get 5 stars, you have to knock my socks off. 4 stars is “good product”, so far. Pretty much as described. I’m using it for a fountain to maintain water level. Only thing that was lacking is an indicator for where the water level for cut off is; lower than expected! It sticks above the water a good 2-3”. I’m not sure the water pressure at the fountain but this valve handles cutting it off just fine. No noticeable leak from insufficient cut off! I was concerned about that. So far, very pleased; does what it is supposed to.
Hugh C Livingston Jr
Reviewed in the United States on September 5, 2020
I am using this to keep my pond water level at a nominal height. It is perfect.
Recommended Products
