Your cart is empty.
Your cart is empty.Product Description
Wireless HDMI Extender Receiver
- 5.8G wireless transmission with dual antenna design improves the quality and reliability of wireless HDMI signals.
- Easy installation, plug-and-play, no additional settings.Avoid the cost and time of installing complex and expensive wiring infrastructure.
- Support IR pass-back with 20-60KHzfrequency,with local loop-out function.
- 1080P high-definition picture quality, support 1080P@60Hz high-definition resolution, support 60 times per second picture update frequency, clear and natural playback, smooth and clear picture".
With the increase of RX, the wireless transmission distance will be shortened.(line of sight distance, unobstructed)
1 TX to 1 RX transmission distance: 200m; 1TX to 2 RX transmission distance: 60m;
1 TX to 3 RX transmission distance: 30m; 1 TX to 4 RX transmission distance: 20m;
Support Maximum 1TX to 4RXs
This wireless hdmi extender can support 1 TX to 4RXs (Max), you can add more RXs according to the quatity you need.
Noted: Users need to pair themselves as needed (as picture) to allow multiple expander RXs to be used. If more RXs are needed, you can search for the B09Y1173WD to purchase, which allows up to 1 TX and 4 RXs connections.
820Ft Line Of Sight Transmission
Wirelessly transmit HD signal (up to 250 m under a barrier-free environment without interference)
Plug-and-play with Local Loop-out
Quick and easy setup as no complicated cables or wires are required and no software has to be installed. The HDMI local output on the transmitter acts as a distributor and provides an additional output for use by the local display.
IR Control
- Equipped IR signal extension, you can control the signal source device at the receiver and it supports IR transmission
- Simply point your remote at the IR emitter included with your device to control your source A/V device.
Audio Separation
The AMS interface on the TX is used to collect external audio, and the sound is transmitted through the TX to the RX for play the collected sound.
Installation Steps
- First connect the HDMI cable, the signal source connect Sender (transmitter) IN input; local display device connect Sender(transmitter) OUT output.
- Then connect the receiver to a remote display device (such as a television, a splicing screen and so on).
- IR remote control function: pay attention to the infrared head of the sender should face and close to the signal source.
Chris Roman
Reviewed in the United States on March 10, 2025
These things work flawlessly! Been using them for karaoke when I have channeling places to place my TV and don't want to string an HDMI cable across the floor. ZERO lag! Absolutely - highly recommended.Read the instructions when setting up and call tech support if you have an issue or go to Youtube for instructions. If it's not working right, it's probably user error. Took me a couple tries to get it right but it works waaaay beyond my expectations.
Darryl Smith
Reviewed in the United States on February 1, 2025
Good product my receiver is not working computer recognizes transmitter just not receiving.
Robert D.
Reviewed in the United States on September 26, 2024
These are basically a transmitter receiver pair that use a WiFi technique to send and receive an HDMI signal (along with IR information). My application has them working through two walls though at fairly close range of about 30 feet. The signal is sound and shows no artifacts though there is a slight latency of about half a second which would complicate their use for something like gaming. My one complaint is that the mounting sockets (threaded brass) are very shallow and only allow for slight threading of an M6 bolt to secure the devices. Short bolts are required and not many threads hold the device on the mount. They draw power through 5V adapters which connect with a USB-C connector. The provided cables are much too short and I had to get longer cables to get from my outlet to the devices in the locations they were placed. Another complaint is that although a single transmitter is available with multiple receivers, additional transmitters are not available individually. In my case, we want to hit the receiver from multiple locations at different times (only one transmitter on at a time) but you have to buy the set to get another transmitter.Appearing to work fine so far, these are small, reasonably priced HDMI (1080) wireless solutions.
Cliente de
Reviewed in Mexico on July 16, 2024
Excelente producto, funciona a la perfección
Glenn
Reviewed in the United States on May 29, 2024
First the product is outstanding and works as described. This product helped resolve an issue where cables cannot run. Setup was straight forward. Did exactly as it should. Love it. The IR control worked perfectly as well.Second, the level of support I received from this outstanding gentleman is a lesson other companies can learn from.I had a few questions about this product along with the ability to add on to the set I had purchased. Weeryyi responded right away and continued to follow up to make sure I got what I needed even after the purchase to make it work for my purposes.Thank you Sir for going out of your way for me, when most companies would not have.If you need a product that this wonderful company/gentleman sells, please do yourself a favor and buy from them.Thank you again for your time and expense to help with my particular situation. This will help me save so much time while working from building to building.Sincerely,Glenn
Humberto cervantes salmeron
Reviewed in Mexico on September 12, 2023
alcance aceptable
Sergo Mexico
Reviewed in Mexico on June 11, 2023
Como aumentar la potencia de su señal? tengo un receptor en un segunda piso y al poner un modem de wifi en la recamara se dejo de ver la señal del TX.
Daniel Navarro
Reviewed in Mexico on October 11, 2023
Todo bien, gracias...
LUIS LOPEZ BATISTA
Reviewed in Mexico on April 11, 2023
Excelente producto
Gieso
Reviewed in the United States on July 21, 2022
I got this to replace competitive set that worked great, but died after 3 months.Product looks good and setup is simple. Everything started perfectly. HDMI Receiver connected to projector, HDMI Transmitter connected to AV receiver. Xbox and set top box connected to AV receiver. All devices are 1080P.Everything worked great, for about three minutes, then the connection stops. Change from XBox to Set top box, it works again, for a few minutes, then stops. Change back, ok again for a few minutes, then nothing.It appears to stop after a few minutes if I am streaming a movie from Netflix, Amazon Prime, etc. on the XBox or if I am watching anything on the set top box. Essentially anything that has copy protection.I am wondering if this set supports HDCP. If not, it is useless for any home theater application.1 Star for now. We shall see if I get any response from support or this is going back.UPDATE 7/21/2022: Support was very responsive and confirmed that the device does support HDCP 1.4. Unfortunately the AV receiver I have sends HDCP 2.2 protected data. This is why it cuts out after a few minutes. If I connect the XBOX or settop box directly to the transmitter, it works fine, but then there is no audio to the AV receiver or ability to switch inputs. That's why I have an AV receiver. Their support recommended that I disable HDCP, but that disables the ability to send protected content. In a home theater, essentially everything is HDCP copy protected. A Theater without the ability to watch TV from a settop box or stream a movie from anything is essentially useless. I really wanted this to work as the quality looks good, but not supporting an 8 year old HDCP 2.2 spec is a show stopper. Returning this.
Michael
Reviewed in the United States on June 22, 2022
Just received this device and I can already say I love it. The packaging of this device feels premium! The unit was better than I expected!I needed a Wireless HDMI Transmitter and Receiver to replace the one that has worked fine but is becoming unstable and requires more frequent resets. I connect this device to my outdoor TV to watch TV and review my works from the pool in my backyard.the transmission distance should be 200 feet or more and the audio is transmitted to the monitor or TV,It has performed well so far, and I'm happy I got it. The picture is high-quality, and there are no sound or picture lags. It connects right away, and everything works well. I can wirelessly extend my HDMI connection without having to worry about the extension wires.However, the wireless design of this one prevents extra clutter, and hassle, and even seems to improve the overall speed and capability of the technology as well.Built-in 5.8G wireless high-speed transmission signal, faster transmission speed and strong anti-interference ability. Using external double gain antenna can transmit long distance, I use it to transmit and watch video from my set-top box to my big screen TV, image processing And the transmission ability is excellent, and the signal is very stable, zero delay, and the definition is basically the same as 4K picture. It is a cost-effective HDMI signal transmission device without cables. This is a great option, great product and I highly recommend this product without any hesitation.
Recommended Products