Your cart is empty.
Your cart is empty.
Dear customer,
This is EASYGUARD brand push engine start module.
The item is fit for 95% DC12V cars on the market, including both diesel and petrol cars, manual gear cars and automatic gear cars. Please kindly check the push start/stop button style & see if which is the one you are looking for. The item comes with English user manual and installation guide.
Important:
1. When installing the system, need to release/unlock or remove the steering wheel lock if there is.
2. The remote engine start function( optional) is only available for automatic transmission car.
3. To use remote engine start function on automatic transmission cars, need there is 3 locking pulses from your existed remote (key fob) when continue to press the lock button 3 times on it. If not, you are unable to use remote engine start function.
4. There is no remote/key fob in this kit, and it need to work with your existed remote/key fob (such as factory key fob or aftermarket key fobs)
5. This item need to work with power locking or central locking system together.
6. The engine start button LED colour is red colour when disarm, turn on ACC, ON and started the vehicle.
7. We do not provide installation service & suggest you to install it by a professional car alarm installer.
7. If there is a chip immobiliser in your original car remote control(key), you need to buy an extra bypass module (like ASIN: B00MEHBVIC or B07NSLPBG7).
Main feature:
1. Push button start/stop
2. Switch among ACC-ON-OFF
3. Keep pressing the button to start the car
4. Remote engine start & stop (optional, need to work with your existed remote/key fob, see description requirement to use this feature)
Packing information:
Control module x 1
Push button x 1
6P ignition harness x 1
Wire harness x 1
Pro Shopper
Reviewed in the United States on December 26, 2024
I am a MECP (Mobile Electronics Certified Professional). Please consider my review,This is what you need to know. If you want to use the arm and disarm feature, the white lock wire and white/black unlock wire must see a 12v+ pulse along with the brown 12v+ (any turn signal light) during unlock to disarm (button on) and during lock to arm (button off). You must test these wires with your remote fob to make sure you get the pulse from your door lock actuator motors. Necessary relays may need to be installed in certain vehicles to reverse polarity and etc. The blue (fuel pump wire) must see 12+ when vehicle is started so the unit knows the vehicle has started successfully. I would wire this to (ACC or Ignition 1) if you don't have easy access to the fuel pump wire.After unlock/disarm the vehicle is ready to be started. The button will illuminate. Just hop in, apply the brake, button flashes, and start. If you want to turn on ACC/blower take your foot off the brake and push the button once, push it again for ignition ON, and once more to cycle everything off. If you wire the lock and unlock wires to work with the existing fob, three unlock pulses will remote start the vehicle.Cheers from Las Vegas!
Recommended Products
$19.90
$ 9 .99 $9.99