Your cart is empty.
Your cart is empty.Product Description
Specification
- Work voltage: 110V
- Power: 20W-60W
- Temp range: 200℃ ~ 450℃ (392℉ to 842℉ )
- Tips model: 900M series
- Soldering stand: Stainless Steel
- Soldering wire: 0.8mm 12g, 2.0% Flux
Package Included
- 1 x Adjustable Temperature Soldering Iron
- 5 x Extra Different Soldering Tips
- 1 x Solder Wire
- 1 x Cleaning Sponge
How to solder
- Prepare LDK soldering stand and soldering iron; Keep the iron tip clean, without any oxides and carbides, applying tin to plate on the surface, especially the first time
- Please wet the sponge before using
- Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly
- When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely
- Please remove the solder wire when the tin is enough
- Take away the soldering iron in a direction approximately 45° and power off
- Place it in the holder while it cools enough safety
Customer
Reviewed in the United States on March 15, 2025
This iron heats up to 350c degrees in just a few seconds.
Kiran Shrestha
Reviewed in the United States on March 27, 2024
Would have given 5 stars if it had an actual stable stand to put the hot iron
Alex
Reviewed in the United States on December 31, 2024
The media could not be loaded.
Edward J Curry III
Reviewed in the United States on December 20, 2024
Needed more heat. This does a great job.
Gerald Hancock
Reviewed in the United States on July 9, 2020
This cheap little iron has big performance! I use it for RC soldering work, and I have 1/8 scale vehicles that require 10ga wire for several hookups. This heats up a 10ga wire like it's nothing. I'm sure there are even better options out there but imo this cannot be beat for the price. Throw away the solder that comes with it if you're planning on doing electrical connections. Use a quality leaded solder, and probably get some extra flux just to be safe. I use cheapo flux from Home D and it works fine for my purposes. Again, I'm sure better options are available but this works for me. I've had this iron for about a week and I've done 6 xt90 plugs with 10ga wire and 2 trucks with 2 xt90's each. Right now I'm hearing this little gem up to do some 6.5mm Castle bullet connectors and I expect it will be a breeze. Temp control works well but the dial seems a bit fragile. Use care when turning it or storing the iron. Dont wrap the power cable around the body of the iron, at best you will lose your setting and you may possibly damage or destroy the dial. That is my only complaint about this iron.*update*I've been using this iron for nearly a year and it is still holding up. I have had a few bonehead moments of leaving it on unattended for fairly long periods but my solder station holds the iron safely away from anything that could be burned or damaged. All that happened is I ruined a couple tips. Luckily replacement tips are readily available, and this iron uses a very common type of tip. That means it is easy to upgrade to a brand-name or other high quality soldering tip in your favorite shape. Doing so has made this iron perform much better even than when it was new for me. It seems like at least once a week I'm using this iron to change out battery connectors on my RC cars as well as the batteries themselves. I've become the go-to guy in ny RC friends circle for soldering. The analog dial leaves a bit to be desired, as it seems to read a higher temp than the iron is really putting out
Delay Man Dan
Reviewed in the United States on April 5, 2020
This is the first solder kit I've ever purchased so I did extensive research on what was need for the repair I needed to perform on a laptop. If your a beginner like me, you cannot rely on the instructions in this kit as so much detail is excluded, such as melting point for solder included in this kit, or the fact that you need to tin the tip before use. There are other important materials that should be included in any soldering kit that were not included, such as flux and solder's wick. The solder iron has a small dial for adjusting the temperature that may require the use of a magnifier to read. I should also mention the stand for the soldering iron is just a thin piece of aluminum that you bend for use.... not the most sturdy support for a hot iron. Good kit for occasional use.
Colt
Reviewed in the United States on April 22, 2020
This is a good cheap kit for beginner
K Guillory
Reviewed in the United States on May 3, 2019
I plugged it in and it works. Really can't expect much more from 10 dollars. Temperature seems to work, but I'm not certain. Used it to remove a battery from an electric toothbrush and it seems to operate just fine. I have two more item to fix over the next month and will update this review if necessary.update - Still works well and temperature is definitely adjustable. I had to increase the temperature to remove the battery form my 7110x razor. This iron is a good deal! I will update this review if the iron fails in the next few months.
Recommended Products
$26.20
$ 13 .99 $13.99