Shopping Cart

Your cart is empty.

Your cart is empty.

Outus 2 Pieces Quartz Clock Movement Mechanisms Non Ticking Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement(13 mm)

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

1.SizeName:13 Mm


About this item

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch; The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect
  • Clock design: the design of the clock hands are simple and stylish which have a various styles; The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using



2 Pieces quartz clock movement mechanisms non ticking clock mechanism with 8 clock hands sets of diy movement kits replacement
How to use:
First you should choose the clock hands that you like and the size is appropriate, then insert the hour hand, minute hand, and second hand into the movement in turn, paying attention to the tip of the clock hands pointing to twelve o'clock, and keep the hands parallel, finally adjust the time according to the local time.
Size from the center of the hole to the tip:
Hour hand length:
Approx. 75 mm/ 2.95 inches, 63 mm/ 2.48 inches, 70 mm/ 2.76 inches, 57 mm/ 2.24 inches, 78 mm/ 3.07 inches, 75 mm/ 2.95 inches, 63 mm/ 2.48 inches, 38 mm/ 1.5 inches
Minute hand length:
Approx. 95 mm/ 3.74 inches, 85 mm/ 3.35 inches, 100 mm/ 3.94 inches, 86 mm/ 3.39 inches, 115 mm/ 4.53 inches, 105 mm/ 4.13 inches, 85 mm/ 3.35 inches, 50 mm/ 1.97 inches
Second hand length:
Approx. 115 mm/ 4.53 inches, 95 mm/ 3.74 inches, 95 mm/ 3.74 inches, 97 mm/ 3.82 inches, 105 mm/ 4.13 inches, 95 mm/ 3.74 inches, 47 mm/ 1.85 inches
Second cap: approx. 7 mm/ 0.28 inch
Specifications:
Material: ABS and aluminum
Power: 1.5 V AA battery (not included)
Package includes:
2 Pieces quartz clock movement mechanisms
2 Sets mini accessories
8 Sets clock hands
Note:
This product package does not contain batteries.


Mamase
Reviewed in the United States on March 27, 2025
Got what I ordered. Working good; just wish there had been a little larger hands in there.
Critter Mary
Reviewed in the United States on March 21, 2025
These clock parts were amazing! I was able to easily fix a special clock and have a second one to fix the clock in our camper. Great selection of arms and easy to assemble love the smooth action.
THOMAS E.
Reviewed in the United States on January 4, 2025
Everything was packaged well. The value of these movements could never be compared to purchasing a local craft store. Good Packaging, quality product and they are competitive on the price point. Nice Deal. Ontime for 2025!
AllTold
Reviewed in the United States on January 18, 2025
Very good clock modules. I will buy more!
S. Phillips
Reviewed in the United States on June 26, 2024
It was nice to get 2 mechanisms, not just one. Knowing from past experience I had measured the length and width of the spindle and verified size. Make sure you do that, as it is not a one size fits all. Great that it comes with a large choice of clock hands. Works well, fits as it should and so far so good.
Bruce
Reviewed in the United States on March 7, 2024
Replaced a clock mechanism that no longer worked. The key was making precise measurements on the old piece and matching to what is available. It fit just fine and I was able to reuse the old clock hands. Runs smoothly, quietly and accurately.
ARMAND alain
Reviewed in France on August 27, 2023
ça paye pas de mine, mais montage très facile, grand choix pour les aiguilles qui se fixent très facilement sur le pivoter ça démarre aussitôt dans un SILENCE absolu !!!!!!!!!!!! rapport qualité prix imbattable, envoi très rapide, je recommande !!!!!!!
ScrewDriver37
Reviewed in the United States on August 26, 2022
Good verity of hands. Was able to find one that world worked well for both clocks I needed to fix. The accuracy was ok, I wish their was a way to adjust it, but it is acceptable. However one stopped working after about 6 months. One is still doing good so far. They were easy to install these were the 13mm or ½ inch long shaft good for a clock face up to .5 inch thick.
vince
Reviewed in Italy on August 20, 2022
Oramai è trascorsa una settimana da quando ho acquistato questo orologio e l'ho rapidamente montato al posto di quello malfunzionante che avevo. L'orologio è silenziosissimo e precisissimo. Ho controllato a più riprese con orologi radiocontrolalti e debbo dire che non perde un secondo. Eccellente davvero. Inoltre viene fornito con diversi set di lancette e questo permette di montarlo su molti diversi orologi. Il costo è davvero limitato, viste le performance.
Alex
Reviewed in Canada on May 2, 2022
Product works perfectly, completely silent movement. There was some confusion with the transporter, to which the seller resolved quickly. Their communication was fast and clear, even on a weekend.
ScooterTony
Reviewed in the United States on January 29, 2022
I like the silent movement of the clock mechanism. I purchased this item to complete Christmas presents and they worked flawlessly keeping excellent time. I like the sweeping second hand which adds to the overall appearance and shows instantly if the batteries need replacement. I recommend this product and this seller as they were delivered on time and have multiple options for the hands depending on the project.I used them to make clocks out of old saw blades and they worked perfectly.
David Marsh
Reviewed in the United Kingdom on July 25, 2021
Had a pair of budget wall clocks that had not worked for a while and decided to attempt a repair. These two units were a perfect fit for the plastic fascias. The supplied hands were really useful as the existing ones were a slighthly different size to the shaft. The hands are made of aluminium so you can cut them to length with a pair of scissors if they don't quite fit the fascia. Both units seemed to work well and keep good time. A 5 minute job and far better than chucking the clocks in the bin.
Patricia Andrino
Reviewed in Spain on May 5, 2021
Vino perfectamente , calidad precio genial
Recommended Products