Your cart is empty.
Your cart is empty.Great Product
DonGregorioYJack
Reviewed in Spain on February 7, 2025
The media could not be loaded.
Customer
Reviewed in the United States on February 4, 2025
Does not work on G30 mags.
Vince
Reviewed in the United States on February 16, 2025
Does what it’s supposed to and hasn’t broken yet. Gen 5 Glock base plates stick out a bit in front and aren’t compatible with the magwells I run on my EDC guns. This tool was very helpful in swapping base plates on all my mags and made a normally difficult job pretty painless.
Kindle Customer
Reviewed in the United States on June 28, 2024
I enjoy the ease of use. Makes disassembly much easier. Highly recommended.
Mx-5
Reviewed in the United States on March 2, 2024
I had some old glock 42 mags (380) that I wanted to send back to glock and get the improved 03 versions. I had Pierce extensions on them. I tired everything short of mutilation they would not come off. Well this little trinket did the job! It also works on my OEM glock mags like nothing. Super easy. 9mm and 45ACP. Big smiles on my face. I’m impressed.Update - I found some 42 mags that took +1 and +2 that would not work. Still give it 5 stars after all it was designed for Glock OEM mags and it's a whiz at that.
PW
Reviewed in the United States on February 8, 2024
It's not expensive & easy to use, but I hemmed & hawed giving it 5 stars overall. Cleary it is a 5 during the first several times used. However, cracking loose the Glock mag base plate puts a lot of pressure on the post & I don't know if the post will hold up long term. That said I couldn't in good conscience downgrade an item on something that might never happen. I hope the post stays solid as it is clearly a useful tool & appears well-made.
Familie J
Reviewed in Germany on November 7, 2024
Das Real Avid Magplatten-Werkzeug ist ein absolutes Must-have für jeden Waffenbesitzer, der seine Glock-Magazine sicher und effektiv warten möchte. Es macht das Wechseln, Montieren und Reinigen der Magazin-Grundplatten kinderleicht. Die Handhabung ist äußerst praktisch, und dank des robusten Materials fühlt es sich sehr stabil an. Besonders gefällt mir, wie präzise das Werkzeug arbeitet, ohne dass man sich Sorgen über Beschädigungen oder Kratzer machen muss. Es sorgt für eine schnelle und sichere Montage, und der gesamte Prozess ist dank dieses Werkzeugs viel weniger umständlich. Ich kann es jedem empfehlen, der eine zuverlässige Lösung für die Pflege seiner Glock-Magazine sucht!
Franchu
Reviewed in Spain on January 7, 2024
Muy bien
NeverB4
Reviewed in the United States on October 20, 2023
This tools works great for it's purpose. It's way better than most alternatives out there. I've snapped a couple of the tools I've purchased on Amazon for removing the bottom of my Glock magazines. Man, they're a pain. Not only do you have to slide them, but there are two notches on each side of the magazine that are truly locked in. If you don't stick a flathead screwdriver in between the base and the side of the magazine, Then you're bending your magazine to get it apart. With this tool, all of that comes to an end. The unloader is cool, too, although I don't really use that as much. Great tool!
Ron B
Reviewed in the United States on February 14, 2021
I was struggling to replace my G20 magazine floor plate using a handheld punch - while HK magazines cost a fortune, they are a breeze to take down - not so with these Glock magazines! After scraping up my hand one too many times, I decided to order this tool. Following the included instructions, it was a flawless, quick process to remove the factory magazine floor plate, disassemble the mag, and put it back together.I also decided to try replacing my factory floor plate with an oversized stainless steel plate (entirely for cosmetic reasons). It was a bit of a challenge - as you can see in the photo, this aftermarket floor plate is larger than the factory floor plates, so it doesn't "seat" into the tool nicely. It requires a bit more maneuvering with your hands - and some more force. *However*, as you can see in the photo, it works. The tool is still able to install AND REMOVE these floorplates without damaging the magazine, floorplate, or itself - I have my doubts that a cheaper handheld tool would escape unscathed!This tool is clearly able to perform to design specs and beyond. And for only $15, it should be in any Glock mag owners' tool chest.
Adam Churvis
Reviewed in the United States on July 8, 2020
Some things they don't tell you that they really should, if they want to sell more of these.First, this is a VERY well-engineered tool. There are two materials used -- a stiff but gripping frame molded as a single piece around a core of extremely high-strength plastic, which feels reinforced. The gripping part makes the tool entirely non-skid on the surface you are using, and the super-strength part is what interfaces with the magazine proper.Second, it actually works exactly the way they claim, and it really is that easy. And it seems like they spent a lot of time sweating the minor details, like the angle at which you begin levering the magazine and how that prevents you from slamming it into the work surface, and the tolerances which are the perfect balance of precision and clearance for easy use.Third, this thing is built like a tank. Turn yours upside-down and you'll see how they've reinforced the inner super-strength part in such a way that it creates the perfectly-shaped magazine unloader. Frankly, this thing is worth twice what they charge. The people involved in bringing this to market are true mensches to the firearms industry, and I look forward to seeing more of their inventions.BOTTOM LINE: If you own a Glock, buy this.UPDATE: So I bought a Mantis X system for practicing indoors, using the Glock magazine floorplate replacement adapter. I removed the stock floorplate using this tool and then manually pushed on the adapter floorplate... and then saw how the adapter floorplate's detent hole was now recessed deeply under the short Picatinny rail on the floorplate. Oh, No! So I became frantic about how this tool wasn't going to help with removing THIS floorplate... until I tried it. You won't believe this, but they actually formed the super-strong insert to exactly fit the recess in the Mantis X adapter! Of course, because the adapter floorplate is way thicker than an original floorplate, the mag drops down onto the tool an eighth of an inch once you slide it off the floorplate adapter, and you'll have to manually push the adapter onto the magazine rather than use the tool, but that's a piece of cake and the main reason I bought this tool was to remove Glock floorplates.
Recommended Products
