Your cart is empty.
Your cart is empty.Product Description
Specification:
Model: ADTV-YC
Time range: 0-10s
Rated voltage: AC 110/220V, DC 12V, DC 14V (Optional)
Rated current: 5A
Power consumption: 2VA
Contact load: Medium power
Contact switching current: 5A
Contact switching voltage: 1V
Coil power supply: 24V
3C rated voltage range: <36V
Ambient temperature: -10~50
Ambient humidity: 45-85%RH
Dimensions: 57×86×95mm / 2.24×3.38×3.74in
Weight: Approx. 219g/7.7oz
Ed
Reviewed in the United States on March 25, 2023
Switches up to 5 amps with separate timers for on and off, set by 2 dip switches for sec/minutes and ranges of 6 6/60 and a fine tune pot gives you a range of .5 seconds to 60 minutes each. LED denotes active channel. The base is included. Mounting is to a single household switch box, or you can simply tape around the base. There is no documentation included. The side diagram correctly shows the pins for 120 and 220 vac power supply, for the switch pinning it's misleading. It is normally off and starts on that cycle, so keep the off timer set as low as possible when testing. I use it to cycle my forced hot air furnace fan. The minimum off cycle for me is 2 minutes to prevent overlapping cycles, continuous fan.
mike
Reviewed in the United States on February 24, 2023
I couldn't use it as it's a different input power supply
Ron
Reviewed in the United States on December 24, 2023
I use it to cycle the auger feed motor on pellet stove. It has cycled off/on for an entire heat season without issue and is still running strong in the second season. That is over 750,000 on/off cycles so far. I run it 5 sec off and 2 sec on all day every day for 5 months.
Trevor
Reviewed in Canada on November 19, 2023
I returned as it didnt do what i thought it would. It on delays and off delays continuously non stop. I needed off delay and an on delay each power cycle.
Albee
Reviewed in the United States on April 29, 2023
Just bench testing. Working properly.Just an FYI the A/B switch on the back by the pins switches between on delay and off delay. Factory switched for off delay. Will udate if any future issues
David A.
Reviewed in the United States on June 10, 2022
Did not come with the block to hook up wires to. It’s useless with out that. Once I can find a wire if block I’ll use it but it should come with one.
Recommended Products